How To Use Lock Washers Diagram

I have both internal teeth washers and external teeth washers. Internal teeth or external.

Bearing Lock Nuts With Tooth Lock Washer Misumi Misumi Mexico

Im using some star lock washers to keep or at least resist a bolt from backing out.

How to use lock washers diagram. Use tooth lock washers for extra force. Additional sizes up to m130 are available upon request. Lock washers for example help prevent accidental loosening of the bolt.

Vibration proof locking washers made of other alloys are available as well. Use a split lock on a small low intensity job since bigger loads will flatten the washer and make it useless. Lock washers are used to keep screws and bolts from loosening especially as a result of vibration or changes in temperature.

Nuts are threaded onto the bolt to tighten the connection and. Lock washers are installed by putting a bolt or screw through the center of the washer so that the washer is beneath the bolt or screw head or between the nut and the surface being fastened. With their jagged edges tooth lock washers hold the nut or threaded fastener in place with a significant amount of force.

The lock washer grips into the surface below the screw or bolt head helping to prevent the threads from loosening over time. Specialty washers are also available. Why do both exist.

In other words the bolt goes straight into the hole and doesnt poke out the other end so no nut is used. So are wedge lock washers for left handed threads. Are they for differant applications.

However general installation guidelines for lock washers will help you to choose what type of lock. Washers are used to strengthen the connection by distributing the force that is being applied by the bolt over a broader area. How to assemble washers bolts nuts.

There are no set in stone standards for when to use lock washers or what type of lock washer to use in every situation. Place the lock washer between the nut and the work surface if using a nut and bolt configuration or between the fastener head and the work surface if using a tapped hole configuration.

Securing Bolted Joints Under High Vibration Fastener Fixing